News: If you are a ERCHA member and do not have ERCHA member status in forums please post.
Pages: [1]
  Print  
Author Topic: Align 450 head speed  (Read 4792 times)
BrianG
Guest
« on: February 04, 2011, 10:01:44 PM »

At the last indoor evening I was getting some help in setting up my Align 450, and was told to re-gear for something less than 2000 rpm headspeed.

I can't figure out how to get anywhere near that low a headspeed with the OEM RCM-BL 430 XL motor (3700 kv).  It carries a 1/8" (3.17mm) shaft and the smallest pinion available is 12T which gives 3400 rpm @ 100% or 2700 rpm @ 80% . 

If I use a motor with a 2mm shaft, the smallest pinion is 9T which would yield 2500 rpm @ 100% or 2000 rpm @ 80%.

What motors are suitable for the Align 450 that have 2mm shaft and something like a 3500 kv rating??
Logged
Dmitry
ErchaMember
Sr. Member
*
Offline Offline

Posts: 95


View Profile
« Reply #1 on: February 05, 2011, 06:01:29 PM »

No, no. You do not want to fly so low head speed.
Use something around 2500-2700 RPM for hovering.
Logged
rotorsport
ErchaMember
Sr. Member
*
Offline Offline

Posts: 91



View Profile
« Reply #2 on: February 16, 2011, 02:17:02 PM »

Brian I did some checking on RR and the general speed all are saying to use is 2500, When we were at the indoor what was the speed of your 450?

I will have to check out what mine is and compare.

I did get the 250 set up on the DX6i and the test fling was good so yours should not be a problem.

We will get yours tamed down to a nice feel.

Charles
Logged

Charles
Century REP
Leisure TECH Products
Pages: [1]
  Print  
 
Jump to: