News: If you are a ERCHA member and do not have ERCHA member status in forums please post.
Pages: [1]
  Print  
Author Topic: Jive 80 HV for 6S  (Read 4632 times)
Freeskiken
ErchaExecutive
Hero Member
*
Offline Offline

Posts: 267


View Profile
« on: September 19, 2011, 09:01:10 PM »

Hi, Does anyone know if the Kontronik 80HV will be OK for a 6S system. Some other people have said I should only use a 100LV on 6S. Thanks Ken
Logged
Dmitry
ErchaMember
Sr. Member
*
Offline Offline

Posts: 95


View Profile
« Reply #1 on: September 19, 2011, 10:44:37 PM »

What helicopter and motor you are planing to use with that ESC?
On 550mm blades with 4025 motor - this ESC will work for mild 3D.
On 600mm with 4035 motor - it will be good for hovering only.
« Last Edit: September 20, 2011, 02:02:58 PM by Dmitry » Logged
Wizzard
Guest
« Reply #2 on: September 20, 2011, 06:47:12 AM »

I ordered my Logo 500 last week but am now waiting for the 100LV to get back into stock. I will be swinging 553 Edge blades and upon some reliable advice will go with the 100LV Smiley
Logged
Freeskiken
ErchaExecutive
Hero Member
*
Offline Offline

Posts: 267


View Profile
« Reply #3 on: September 20, 2011, 09:16:49 PM »

This is my setup now:

My T-Rex 600 FBL. With Castle 1717 Motor 1500 KV 4 Pole, 14 Tooth Pinion, KDE Mod.7 Main Gear 164 Tooth, CC Phoenix Ice 100 ESC, WR Super BEC, V Bar 5 Pro,6s 22.2 Volt 6000 mAh Nano-Tech Battery 25-50c, 3 - Align DS610 Cyclic Servos @ 6V, Futaba BLS254 Tail Servo, WR LED Tail Step Down 5.2 Volt.

I was planning to change the ESC to the Kontronik Jive 80HV but it sounds like I should get the 100LV.
Logged
Freeskiken
ErchaExecutive
Hero Member
*
Offline Offline

Posts: 267


View Profile
« Reply #4 on: September 21, 2011, 04:06:08 PM »

I ordered the Kontronik Jive 100LV. AMain Hobbies has them in stock.
Logged
Wizzard
Guest
« Reply #5 on: September 22, 2011, 06:48:42 AM »

I ordered the Kontronik Jive 100LV. AMain Hobbies has them in stock.

You must have got the last one Sad

Shows on back order now........
Logged
Pages: [1]
  Print  
 
Jump to: