Edmonton Radio Control Helicopter Association

Events => Fieldwork => : Freeskiken August 26, 2012, 03:40:34 AM



: Deck Repair !!
: Freeskiken August 26, 2012, 03:40:34 AM
Hi, Everyone. We need to repair the deck. I will get some 3/4" wood out to the field with my truck. Will need some help screwing it down. I will keep you posted. Thanks Ken


: Re: Deck Repair !!
: Freeskiken September 04, 2012, 05:59:30 PM
Hi, Everyone

Looks like this Saturday we need some people to post here if they can give a hand unloading, cutting and screwing in new plywood for the deck. Please post here if you can help or give me a call, 780 915 4600.

Thanks Ken

 


: Re: Deck Repair !!
: DNR-Enforcer September 05, 2012, 07:36:28 PM
I will try to come down after lunch.


: Re: Deck Repair !!
: Groundfx September 06, 2012, 01:09:35 AM
What time are we planning to meet at the field ?   

    Roland






















: Re: Deck Repair !!
: Freeskiken September 06, 2012, 04:36:25 AM
Hi, Guys

I will stop at Totem and buy the plywood and screws. I will be at the field about 12:00 noon with the supplies. If you have a drill and bits bring it. I have a skill saw I will bring.   

Thanks see you there.

Ken


: Re: Deck Repair !!
: medivac September 06, 2012, 04:54:13 PM
Unfortunately I am working and cannot help out. Sorry fellas.

Dave


: Re: Deck Repair !!
: Newbie4Ever September 06, 2012, 10:50:29 PM
I will do my best to be there for noon.

Perry


: Re: Deck Repair !!
: Groundfx September 07, 2012, 01:45:28 AM
I will be there by noon or before......

 Roland.


: Re: Deck Repair !!
: TVaillancourt September 08, 2012, 04:47:23 AM
I'll be there around 11:30 or 12:00 I think Mike Dawe will be there too!We will get er done!

Travis V.


: Re: Deck Repair !!
: Freeskiken September 09, 2012, 01:15:05 AM
Well we have a deck without holes!! A lot better, stable and looks great !! We also moved the bricks to a better spot not in the parking lot. Move the packer. Cut some plywood for the angle iron table and covered it. Thank you Perry, Mike, Travis V, Rolland, John and Dave !! Thanks to you all for your help !!! We even got some flights in !!

Ken


Sorry, the copyright must be in the template.
Please notify this forum's administrator that this site is missing the copyright message for SMF so they can rectify the situation. Display of copyright is a legal requirement. For more information on this please visit the Simple Machines website.