[PRICE REDUCED TO $ 75.00 EACH OBO[/b ]Thanks Ken kmeindin@telus.net https://www.tanicpacks.com/product_info.php?cPath=111_120_153&products_id=863&osCsid=9ee8538dd77d87938f48395316c762321 Pack A123 10 S 2300mah[10S A123] $250.00 This is for 1 pack of the 10 cell A123 cells. Perfect for the Mikado Logo 500!!!!!Nominal voltage is 33.0 volts or 3.3 volts per cell.(fully charged 3.65 volts per cell or 36.5 volts) The capacity of this pack is 2300mah.These cells are safe, cannot catch fire and have an expected cycle life up to 1000 charges.The discharge rate is up to 50 C ya 100amps for 15 seconds!! at 30 C expect the voltage to maintain 2.5 volts per cell.With the proper set up or charger these cells can be recharged in 15 minutes. Take a look at our regulated power supply for charging at these rates. Also we carry the FMA cell Pro 4 that is A123 ready Add an A123 parallel plug to use this as a 10S 2P pack (33.0 volt 4600mah)cell weights= 70 gramscell size= 65.5mm x 26.15mm]

Hi, I have three 10cell A123 Battery packs. Made by Tanic Packs, 30-50c 2300 mAh 32 Volts. Regularly $ 250.00 each. Low use maybe 10- 15 flights. For sale $ 100.00 each. PRICE REDUCED TO $ 75.00 EACH OBO[/b ]Thanks Ken   kmeindin@telus.net

 https://www.tanicpacks.com/product_info.php?cPath=111_120_153&products_id=863&osCsid=9ee8538dd77d87938f48395316c76232

1 Pack A123 10 S 2300mah
[10S A123] $250.00
This is for 1 pack of the 10 cell A123 cells.
Perfect for the Mikado Logo 500!!!!!
Nominal voltage is 33.0 volts or 3.3 volts per cell.(fully charged 3.65 volts per cell or 36.5 volts)
The capacity of this pack is 2300mah.
These cells are safe, cannot catch fire and have an expected cycle life up to 1000 charges.
The discharge rate is up to 50 C ya 100amps for 15 seconds!! at 30 C expect the voltage to maintain 2.5 volts per cell.
With the proper set up or charger these cells can be recharged in 15 minutes. Take a look at our regulated power supply for charging at these rates.
Also we carry the FMA cell Pro 4 that is A123 ready
Add an A123 parallel plug to use this as a 10S 2P pack (33.0 volt 4600mah)
cell weights= 70 grams
cell size= 65.5mm x 26.15mm

 

Hi, I have three JR DS821 Servos used, good condition. Regular price $ 29.99 each. For sale $ 30.00 for three OBO. Thanks Ken  kmeindin@telus.net

The JR DS821 servo is a powerful, accurate sport digital servo recommended for RC airplane applications up to 1.20-size. For helicopters, the DS821 operates best with 30-size glow models, and up to 50-size electric.

 DS821 Digital Sport High Torque Servo    Specs
  Size Category: Standard
  Type: Digital
  Torque: 72 oz-in @ 4.8v, 88 oz-in @6v
  Speed: .19 sec/60° @ 4.8v, .15 sec/60° @ 6v
  Length: 1.50 in
  Width: 0.74 in
  Height: 1.47 in
  Weight: 1.5 oz
  Bushing Or Bearing: Bearing
  Bearing: Single
  Motor Type: 3-pole ferrite
  Gear Type: Nylon
  Gear Material: Composite
  Application: Standard size-digital servo upgrade for sport pilots
  
 
 
 

Hi, Use in good condition. Regularly $ 89.99 asking $ 45.00 OBO  Thanks Ken

JR 810G Sport Gyro Servo 4.8v Only
Overview
When it comes to tail servos, speed is crucial to high holding power. With a lightning-fast .10 sec/60-degree tansit time, the S810G will give pilots better holding performance than any conventional servo. And modelers of more modest means will be happy to know they can obtain this outstanding holding performance at a very affordable price.
 
Key Features

Great value for performance
Fast transit time improves gyro performance over a standard servo

810G Sport Gyro Servo 4.8v Only    Specs
  Size Category: Specialty
  Type: Analog
  Torque: 34 oz/in @ 4.8V
  Speed: .10 sec/60° @ 4.8V
  Length: 1.54 in
  Width: 0.75 in
  Height: 1.36 in
  Weight: 1.68 oz
  Bushing Or Bearing: Bushing
  Motor Type: n/a
  Gear Type: Nylon
 
 

 

Hi, I have a slightly used Align KX860024A 650L Brushless Motor (1220KV). Very few flights on it. It is still connected to the Align 75 Amp ESC. Would like $ 100.00 OBO. Thanks Ken   kmeindin@telus.net  

Reduced to $ 75.00 OBO

Hi, I have a new in box FMA Copilot 2 system combo with IR programer. Was $ 200.00 lowered to $ 159.00 plus shipping. I am asking $ 120.00. Thanks Ken kmeindin@telus.net

The NEW Co Pilot II systems represent the culmination of years of cumulative technological development and manufacturing knowledge in commercial flight stabilization. FMA's patented Infrared thermo-technology for semi-automomous control of R/C model aircraft has an outstanding reputation, with ten's of thousands of units sold. Adding an additional level of safety to model aircrafts of all types, the time-proven concept has enabled pilots from all over the world to fly with confidence, learn new aerobatic manuevers, protect their investment in case of electronic or mechanical failure, and assist modelers of all experience and skill levels to just feel more confident when flying.

Hi, I have a new Futaba GY520 Gyro in box. Would like $ 100.00  Thanks Ken  kmeindin@telus.net  

Yes, We need gravel and sand. A packer, bobcat would be nice to get the sand and gravel in the trench. I talked to Travis and he said he could get the packer and I think a bobcat. No sense trying to lay bricks without the sand and gravel. Then we need more help if we are to complete this project. We also need to rent a saw to chop some of the bricks since there are not enough small pieces. Mark said that there is a plastic edging that you put beside the blocks on the edges. Do we need to get this as well ? We will need short 2 x 4 and hammer to tap the blocks tight. String line.  Thanks Ken